Even the most experienced drivers find themselves in unexpected trouble sometimes. As a drive, one of the key instincts that might kick in to avoid your car from an imminent collision on the road is to jump on the brakes. This is where Vehicle Stability Assist (VAS) and the Anti-Braking System (ABS) comes in. These two mechanisms are set in place to stabilize the car during sharp turns and prevent the wheel from locking up to maintain a firm grip on the road. In this article, we will look at the VSA and ABS braking systems in detail.
What is VSA?
The Vehicle Stability Assist system – VAS allows the car to hold its stability even during concerning circumstances, such as when you turn but steer the wheel more or less than desired. This system allows you to maintain traction while you drive the car at increasing speed on a loose or slippery road.
How does VSA work?
The mechanism of a VSA system is pretty straightforward. It provides the car with an added assistance by regulating the output of the engine and through selective application of brakes. When the VSA system activates in your car, you might notice that the engine isn’t as sensitive to acceleration as it normally is. Additionally, you can see if the VSA system is activated by checking the VSA indicator blink. Anti-locking Braking System – ABS is another pre-installed preventative measure in vehicles to enhance the stability of the car in concerning situations by ensuring that the wheel stays mobile to maintain the driver’s grip with the road below. ABS was initially launched as an anti-skid system in the 1950s for aircraft usage. Today, this feature is present in almost every modern car.
What is ABS?
Anti-locking Braking System – ABS is another pre-installed preventative measure in vehicles to enhance the stability of the car in concerning situations by ensuring that the wheel stays mobile to maintain the driver’s grip with the road below. ABS was initially launched as an anti-skid system in the 1950s for aircraft usage. Today, this feature is present in almost every modern car.
How does ABS work?
ABS is an important component of the overall stability system of the car called electronic stability control. This system is responsible for monitoring the steering wheel when the vehicle is undergoing heavy braking. All the four wheels have a sensor attached to them in case one of the wheels is about to lock up and seize motion, in which case the system releases the brake to ensure the driver does not feel a sudden jerk. The ABS continues to apply the required pressure to each wheel to ensure the system brakes without any of the wheels locking. While driving the car with the ABS activated, you might feel a pulsation through the brake pedal when you press it. This safety measure aims to ensure that the driver stays in control of the vehicle instead of bringing the car to a halt. Anti-locking Braking System – ABS is another pre-installed preventative measure in vehicles to enhance the stability of the car in concerning situations by ensuring that the wheel stays mobile to maintain the driver’s grip with the road below. ABS was initially launched as an anti-skid system in the 1950s for aircraft usage. Today, this feature is present in almost every modern car.
Conclusion
While these two brake systems are very apt at ensuring the safety of the driver and the passengers in the vehicle, it is wise to keep in mind that the ABS and VSA systems do not boost the car’s driving stability in all situations nor do they have complete control over your car’s entire braking system. It is good to practice utmost caution and maintain a reasonable driving speed even with the ABS and VSA systems activated since it acts as a preventative measure for certain situations only. Simply search brake repair shops near me if these two systems are not functional or require maintenance in your car.
