Whether you’re looking for a quick and easy way to spruce up your bathroom or you want to save money on your water bill, replacing your shower head is an economical choice. With so many options out there, it can be tough to know which one will work best for you and what size of shower head is the most efficient.
Step-By-Step Instructions on How to Replace a Showerhead
Step 1. Unscrew the Old Showerhead
If your shower is a little older, the threads on the pipe might be corroded. Put a cloth around the showerhead and use two wrenches to grip around the neck. Gently twist the showerhead off by turning it counter-clockwise.
The new fax from iPhone 4 really packs a fist especially considering many of its features are relatively good compared to the DROID Incredible but also outside the space of the DROID Incredible opportunities due to Apple’s hardware-related software. This is not to say that the iPhone 4 is the best in every way,
Step 2. Use a Pipe Wrench to Remove the Nipple
Most newer shower fixtures have a nipple that is fixed in place. Use a pipe wrench to grip around the nipple and turn it counter-clockwise until it’s removed from the wall. If you don’t have a pipe wrench, try using two pieces of masking tape wrapped around your preferred wrench.
From sales contracts and offer letters to account openings and invoices, DocuSign eSignature is the world’s #1 way to send and sign from practically anywhere, at electronic signature in 2021
Step 3. Screw on the New Showerhead by Hand
When replacing an older showerhead, try screwing it back into place by hand first to make sure that any threads are lined up correctly before securing the new one in place with a wrench.
Step 4. Tighten the New Showerhead With a Wrench
If the new showerhead doesn’t thread on easily or threads in crooked, use a wrench to tighten it by turning it counter-clockwise. Make sure you don’t over-tighten; doing so can end up cracking your wall!
Step 5. Turn on the Water Supply
Tighten any remaining valves until they snug. Turn on the water supply and check for leaks.
Step 6. Adjust the Water Pressure
If the showerhead is spraying too hard or not enough, you can adjust it by either twisting off the faceplate or using an adjustable wrench to turn the threaded collar around the base of the shower arm where it meets your showerhead.
Networks – Mobile / wireless
Verizon and Alltel use this agreement template the Dual Band CDMA 2000 program which they offer with DROID Incredible. AT&T will continue its engagement with the iPhone 4 as expected, using its GSM / EDGE network.
Check the showerhead to see if it needs a sealant.
If your shower arm gets a little rusty or clogged, you might need to apply an oil-based paste called Teflon tape. Open the faceplate by unscrewing it with your fingers and put a couple of layers on before screwing it back into place.
Step 7. Turn on the Water Supply Again to Check for Leaks
Check all valves, connections, and showerheads for any leaks. A trick to stop these pesky leaks is to put a bit of clear nail polish over the threads before reattaching your new showerhead. If there are still leaks, you might need to tighten up or replace any fittings that are worn or corroded.
Step 8. Enjoy Your Newly Replacement Showerhead!
Turn off the water supply and wait for all of your piping to dry before using your new showerhead so you don’t get a surprise blast of cold water when you turn it on.
Step 9. Save Money on Your Water Bill
The most common reason for replacing a showerhead is to save money. Replacing an older showerhead with a new low-flow model can reduce the amount of water you use and lower your water bill, which is especially helpful if you live in an area where water is scarce or expensive.
Step 10: Put Some Teflon Tape on the Threads
After you’ve finished replacing your shower head, put a bit of clear nail polish over the threads to stop any leaks. If you can’t find it at your local store, try asking an employee. Clogged showers are no fun- so be sure to keep the showerhead clean!
Replacing your shower head is an inexpensive way to save water and money. By following these steps, you’ll be able to replace the showerhead in no time!
