Netgear Orbi Firmware Update Failure? Here’s the Solution!

Updating the Netgear Orbi firmware on a regular basis is quite important to ensure the smooth functioning of your Orbi device. However, lots of users are facing a hard time performing the Orbi firmware update. In the event that you are also struggling with the same issue, you have found the right post. Here, you will get to know how to resolve the Netgear Orbi firmware update failed error. Let’s get started.

How to Fix Netgear Orbi Firmware Update Failed Error?

1. Change Your Orbi Device’s Placement

Get started with the things by cross-checking the placement of your Netgear Orbi device. On the off chance if it is not placed properly, relocate it by taking the following points into consideration:

• Be sure that the Orbi device is kept at a central location of your home.

• Place the Orbi WiFi router close to your Orbi satellite.

• Keep your Orbi away from interference-creating devices such as metal doors, aluminum studs, baby monitors, cordless phones, Bluetooth speakers, microwaves, refrigerators, and then some.

• Don’t hide your Orbi device behind curtains, inside an almirah, under a table, and inside a cabinet.

After relocating your Netgear Orbi device, try updating its firmware to the latest version and check if the issue is now resolved.

2. Are You Following the Correct Firmware Update Steps?

Chances are that you are following wrong steps or missing any step while updating your Netgear Orbi firmware. To be more accurate, check out the below-given complete steps to update your Orbi firmware:

• Power on your Orbi device.

• Connect your Orbi router and satellite with each other using an Ethernet cable.

• Now, turn on your computer or laptop.

• Open an internet browser of your choice, be it Chrome, Firefox, or Explorer.

• Type orbilogin.net in the URL bar and hit the Enter key.

• The Netgear Orbi login window will come into view.

• Insert the username and password into the given fields.

• Hit Log In.

• After logging in, click on the Firmware Update section.

• In case you see any new firmware version available, hit the Update button.

• Don’t interrupt the Orbi firmware update process in-between.

Thus, you can update your Netgear Orbi device’s firmware. Just in case you are still unable to perform the Orbi firmware update process, go through the below-highlighted troubleshooting tips.

3. Reboot Your Netgear Orbi

Maybe there is a technical glitch due to which you are getting the Netgear Orbi firmware failure error. But don’t you worry. This technical glitch can easily be taken care of. All you need to do is just reboot your Netgear Orbi device. Here are the do-follow steps to get the job done:

• Unplug your Netgear Orbi router from the wall socket.

• Power off your Orbi satellite as well.

• Disconnect all cable connections associated with your Orbi router and satellite.

• Wait for some time.

• Now, make all cable connections again.

• Plug your Orbi router into a wall socket and power it on.

• Turn on your Orbi satellite as well.

After rebooting your Netgear Orbi device, try to perform the firmware update via orbilogin web page and see if it works or not.

4. Check Your WiFi Connectivity

Slow or sluggish internet connection is another reason why you get stuck with the Orbi firmware update failed error. So, check your internet connection immediately. Walk through the below-mentioned instructions to check if you are getting proper WiFi connectivity:

• Make sure that your Netgear Orbi device is properly connected to your modem. On the off chance if your WiFi devices are connected wirelessly so far, use the Ethernet cable to connect them.

• Run a speed test for your internet connection to see if you are receiving the internet speed you have paid for.

So, that’s how you can get rid of the Netgear Orbi firmware update failed error. In case the issue is still annoying you, hit the comments section and drop your queries and issues there. Our experts will respond to you shortly.