I began in pressure washing as a home washing machine. My immediate plan was to concentrate on lining washing and restoring roofs and fences, with some commercial naval work and some flat work. Writing the first two sentences reminds me of the little I knew about the start of the pressure washer industry, which reminds me why I write these articles in the first place: people need better inside information to decide whether to enter this or not field.
I soon discovered that I was doing a low but relatively constant number of home wash houses, and a large number of roof repairs and an even greater amount of commercial foreclosure work. After a few years of learning my trade and better understanding the requirements of my prospective clients, I began to land some commercial building washes, mainly warehouses, especially prefabricated concrete.
Prefabricated concrete containers are easily cleaned, depending on the pollutants they contain, but there are some significant deterioration’s in power washing jax fl methods that you should consider before bidding or starting to clean one.
First is the question of scale. Once you have determined the best method for removing soil in any building, estimate how much you need. I have discovered that it is good to increase my estimation in commercial buildings a little. They always seem to take a little more chemistry than surface area calculations suggest, especially in surfactant. This is probably due to the height of the average stock and the porosity of the concrete substrate. More clinging to keep chemicals on the surface for longer is a clear advantage.
Also, plan to move slower, slower than you think necessary. The tall and uninterrupted walls of the warehouse dry quickly with any breeze, and unlike most homes, there are usually no gardens or trees nearby that provide protection from wind or shade. Both factors increase the speed of drying your solution and require it to be wetted again to keep the chemicals alive and functioning.
Another factor that will affect the height increase is the need for a lift. No matter what method you use to apply chemicals to a home, you probably need a lift to do a good job in a multi-storey business building. This is because the commercial building is much more likely to have large structures that protrude from the walls well above the ground, and these structures often prevent even the best chemical shots from having a direct shot in large areas with high walls. This causes uneven or non-use of your mixture and can increase chemistry. consumption and overspray at unacceptable levels.
An elevator will bring you near the wall you are working on so you can shoot highly concentrated chemicals wherever they are needed. It will also allow you to avoid many of the obstacles on the ground surface, such as filling docks, resting tables, garbage cans and parked vehicles that can interfere with your ability to use the travel mix evenly where needed.
With an elevator comes the requirement of at least one assistant. In home work, it is quite easy to take care of your own hose and machines as it is rarely far from the platform and reaching it requires only a quick step. In a men’s lift, descending can be a complicated operation, and a farmer adds a level of security such as someone who can request help or join the snake so the elevator operator can concentrate on the current job.
When operating an elevator, another person in the elevator may actually be useful for operating in narrow areas as the person in the pipe concentrates on cleaning the surface. In any case, a person addressing concerns on the ground is a necessary part of the larger commercial high-pressure cleaner.
There is another issue related to the staff present in the commercial cleaning that sets it apart from residential work: people trying to do their job in and around the building.
I was recently cleaning ducts in a five-story warehouse when a heating and air conditioning technician came and settled directly under my elevator. He was there to begin inspections and maintenance, and because he had always started working on the specific machine he was working on, he would also start there that day.
