Even with those hard overlapping sliding shower doors, maintaining a spotless bathroom doesn’t have to be a difficult effort. You can make sure your shower doors stay spotless and inviting with only a few minutes of your time and some simple cleaning tools. Your shower may not appear so beautiful if the door is unclean. Cleaning an overlapped sliding shower door is a little more difficult. Cleaning the overlapped area is challenging, and cleaning the tracks where the door glides is even more challenging. Cleaning such items might be a hassle because they get so dirty. Be at ease, though! Cleaning overlapping sliding shower doors is simple with our tips. Your shower can effortlessly stay clean in this way.
Why Your Shower Door Gets Dirty: Surprising Facts
Although you would believe so, the shower doesn’t stay clean. Water helps remove dust, but products we use, such as soap and shampoo, leave a mess on the door. Even water itself can leave unsightly stains since it contains minerals like calcium.
Dust and soap in the water can make any shower door unclean. It gets worse if your door slides. Particularly where it overlaps, the sliding element becomes heavily dirty. Bacteria and grime are hiding.
3 Easy Ways to Clean Overlapping Sliding Shower Doors
Here are three quick ways to clean your sliding shower doors’ difficult corners. Let’s go over the equipment you’ll need and the procedures for each technique.
Removal and cleaning of the Doors
The best method to ensure that your overlapping sliding shower door gets exceptionally clean might sound drastic, but it is the way to go. To thoroughly clean everything, especially the portion that overlaps, you will need to remove the door.
1. Simple Steps for Cleaning Your Sliding Shower Door
- Take the stopper off. A screw at the bottom of the glass sliding door secures a black rubber component to it.
- Remove the glass door. To make the door hang loose after unscrewing the stopper, gently push it from the top. It will come off easily if you are careful and hold it firmly.
- Clean it well. Start cleaning the door after placing it in a secure location. Gently scrub it afterward, and don’t forget to let it air dry.
- Reopen the door. Onto the track at the top, slide the door panel. Lower it onto the bottom track after that. Reinstall the rubber stopper and tighten the screw.
2. Use a sponge stick to Remove Difficult Stains
You might use a simpler method if removing the sliding door seems like a lot of work. Get a sponge stick. It looks like a long rod with a sponge attached. It helps in cleaning difficult areas. The little ball sponge and the cylindrical sponge are the two most often used types of sponge sticks. To clean, choose the cylindrical one. It is small and easily tucks away behind the overlapping sliding door.
- Use water or a cleaning solution to wet the sponge. Make sure the sponge thoroughly absorbs the cleaning solution.
- Pass the sponge through the opening. In the area where the sliding shower door overlaps, insert the damp sponge. Ensure that the sponge’s opposite end touches the door’s open edge. To completely remove the dirt, rock it back and forth.
- Use water to flush. Either get a new sponge or wash the old one. After dipping it in clean water, repeat the previous action. This time, focus on getting rid of any lingering dirt and cleaning agents.
- Apply a dry sponge. Take a fresh, dry sponge and slide it through the overlapped area for this section. This will help in getting rid of any leftover cleaning solution. To prevent rust by removing all the water, it’s crucial to use a dry sponge.
3. Using High-Pressure Hose
Using a hose with powerful water pressure, you may also clean sliding shower doors that overlap one another. This will clean the overlying part of the filth and grime. You can make use of different cleaning agents or soapy water. Make sure it can swiftly clear the accumulation of dirt.
Start by using the hose to spray soapy water. Target the sliding door’s cracks. Give the cleaning solution some time to soak into the glass. After that, thoroughly rinse the soap off using the water pressure.
Professional Cleaning Tips for Your Overlapping Sliding Shower Doors
You can usually clean your overlapping sliding shower door by washing it down with a moist towel regularly. It’s a different scenario when dealing with stubborn stains on the glass, though. The major causes of these unsightly stains on your shower door are soap scum and hard water. But don’t worry, there are simple solutions to these problems, including some efficient cleaning techniques.
1. How to Remove Soap Scum from Shower Doors
You would think that soap would clean. However, the gross residue from the soap bar might adhere to the sliding shower door and produce an annoying buildup that is difficult to remove. However, you may create a foam that dissolves soap scum by mixing baking soda with vinegar (or lemon if you don’t like vinegar’s fragrance). Apply this paste to the door and scrub the scum away. Dry off after rinsing. Additionally, there are products that effectively clean shower doors without the need for scrubbing, protecting the doors from scratches.
2. Remove Water Streaks from Shower Doors
Your shower door may have streaks due to soap scum or dirty water. Although they are difficult to clean, your shower door can gleam once more with a mixture of ammonia and distilled water. Mix two cups of water with two tablespoons of ammonia. On the shower door, spray this. After letting it dry naturally for a while, remove the streaks with a dry cloth by wiping or polishing.
3. Cleaning Shower Doors of Stubborn Water Stains
Calcium and magnesium are two minerals that are present in hard water. Although it won’t damage your shower door, it’s fine for showers. Hard water leaves a mineral deposit on surfaces when it dries. Your sliding glass shower door has this, which is very obvious and ugly. Use a mild cleanser to prevent scratching the glass. Warm water and distilled white vinegar work well together to dissolve minerals. Spray this on the shower door, then wait five to thirty minutes before using it. Next, gently scrape the door to get rid of the accumulation.
4. Cleaning Your Sliding Shower Door’s Tracks
After cleaning the shower door, have you tried to clean the tracks? The tracks are likely even dirtier than the glass if it is. Hard water, dirt, mildew, and mould can all quickly accumulate in the metal tracks. Additionally, because they are harder to clean than the door itself, the tracks are often overlooked. Using a vinegar and water mixture for the glass also works on the tracks, especially for difficult accumulation. To dissolve the dirt, leave the solution on the tracks overnight. Take an old toothbrush the following day to scrub any loose debris. After rinsing with water, dry with a cloth or piece of paper.
Clean Your Overlapping Sliding Shower Door and Maintain it:
The small space where sliding doors overlap makes cleaning them a little challenging. Additionally, the slide track can become dirty. Cleaning the overlapping shower door could seem difficult given how frequently bathrooms need to be cleaned. Cleaning won’t be a major issue if you follow the above advice. It’s not difficult to clean sliding shower doors that overlap. You can keep your bathroom spotless by following a few easy steps and using common home items. Your doors will last longer if you keep them clean regularly in addition to maintaining their best appearance. Remember that consistency is important, so make it a routine to quickly clean your shower doors regularly. You can set up an inviting and comfortable shower by following these instructions.
