Known for excellent routing capabilities and innovative design, Xfinity Routers are one of the most popular networking devices. You can set up the device to fulfill both your wired and wireless networking requirements. However, instances occur when you might encounter issues like Xfinity router blinking orange or red, intermittent disconnection of the internet, poor download speed, etc. Such issues can be frustrating, especially when you need urgent access to the internet. But, you can fix them by following some simple techniques as discussed in this blog. Read on to explore them and understand why Xfinity Router problems even occur in the first place.
Why Do Xfinity Router Issues Occur?
Before we start the discussion on fixing the various issues of an Xfinity Router, let’s understand what the various Xfinity Router issues are and why they occur.
Issues like Xfinity Router blinking red or orange often get triggered due to a lack of communication between the router and your modem. In most cases, physical damage to the Ethernet cable connecting the router and the modem results in these problems. Next, you might see a sudden drop in the internet speed or that there is intermittent disconnection of the internet. These, usually are a result of outdated web browsers, accumulation of cache files and cookies, router firmware issues, etc.
Various Ways of Fixing Xfinity Router Issues
Users often try to do an Xfinity Router login and make changes in the router settings to fix an issue; however, with no success. Logging into the router is not required until you are making any changes to the router settings. You can follow the below-mentioned steps to fix some of the most commonly occurring issues of Xfinity Routers:
-
Restart the Router: Press the power button of the router to turn it off. Disconnect the power adapter of the router from the electric socket. Wait for two minutes and then reconnect it to the electric socket to turn on the router.
-
Check the Ethernet cable: Check if there is any physical damage to the Ethernet cable that connects your modem and the router. If you find any, replace the cable with a new one.
-
Reset the Router: If the troubleshooting steps mentioned above don’t work, reset the router. Press and hold the router’s reset button for about 10 seconds and release it.
-
Check Router Settings: Connect your router to a computer and log into the router admin console to check the router settings. Ensure that all the entries are made properly.
While resetting the router, you will notice that the status lights of the router flicker, and the router restarts. It is recommended that you note down the current settings of the router on a notepad. It will help you reconfigure the router later because the router reset erases all your previously configured settings. In case you encounter challenges or don’t know how to reset Xfinity Router, you can refer to the user manual that comes along with the router. Apart from the process of resetting your router, the manual also includes various other information such as the router specification, setup procedure, installation technique, and so on.
Final Thoughts
Xfinity Router problems are inevitable; however, you can identify the root cause of an issue and follow the various troubleshooting methods mentioned here. Issues like the blinking of orange or red lights are often a result of a lack of communication between your router and the modem. In some cases, any physical damage to the Ethernet cable connecting your modem and the router can trigger problems. In such cases, you can replace the Ethernet cable with a new one and check if the issue persists.
