Plumbing problems come in all shapes and sizes, ranging from relatively minor and inexpensive problems like a leaking faucet or a leaking toilet, to a sewer system back-up or a major pipe leak. likely to cause serious damage to walls, floors, etc. and personal property.
This article lists the most common problems that may require some sort of plumbing work. You can avoid or minimize problems if you know the types of problems that occur most often. In some cases, if you are unable to solve the problem, you need to call the plumber. Call Aqualuxdp company for professional plumber North York to get your issues fixed.
Below are the common problems, their causes, and how to fix them. Some problems are relatively simple to solve, but some will definitely require the help of a professional plumber.
The 5 most common plumbing problems
- Dripping taps.
- Slow drain sink.
- Bathtub or shower blocked.
- Clogged toilet.
- Running toilet.
1. Dripping taps
Dripping faucets are so common that it’s rare to find someone who hasn’t experienced this problem. It is not only a source of irritation; wasted water can drive up your water bill and cost you money. A single faucet can flow hundreds of gallons in a year.
The cause of dripping faucets in most cases is an internal washer that has become stiff, torn, worn, or dislodged over time. Solving the problem is often achievable by the average household head, but it requires the right tools.
2. Slow drain sink
This problem is normally caused by a blockage that restricts the flow of water. Your kitchen sink drain can contain things like frozen grease and food scraps. In a bathroom sink, the blockage is more likely to be caused by knotted hair and soap.
Methods for cleaning a clogged sink may involve using a plunger, pouring in baking soda and vinegar or a chemical remover, or using a plumber’s snake. If the problem is not resolved, it will likely get worse over time, until the drain is completely blocked.
How to unclog a sink drain using chemicals
Make sure you follow all of the directions on the package and make sure you don’t use too much.
- Wear gloves and goggles for your safety.
- Do not mix chemicals. It can produce toxic gases.
- Pour the chemicals down the drain.
Note: Chemicals can damage your drain pipes if used repeatedly, so I recommend that you do not resort to this method lightly.
3. Tub or shower drain clogged
As with slow-draining bathroom sinks, tub and shower drains are typically clogged with hair and soap clogs. Removing the blockage may require the use of a plunger or snake. Baking soda and vinegar can sometimes dissolve the hoof. The problem usually gets worse over time, if not addressed. The problem can be avoided or minimized by purchasing a drain protector to catch the hair.
How to unclog your shower drain using a plunger
- Adding petroleum jelly to the edge of the suction cup will improve the seal.
- Make sure there is enough water in the shower so that the end of the plunger is submerged.
- Dive vigorously.
4. Clogged toilet
When the toilet bowl fills and doesn’t drain, you have a clog. Blockage is normally caused by a mixture of paper and human waste. Clogged toilets can normally be secured with a plunger. If that doesn’t work, a sewer snake or drain screw can be used to loosen the blockage.
5. Running toilet
A running toilet can be expensive; up to 200 gallons of water can be lost each day. The most common culprit is a faulty flapper valve that controls the water flowing from the reservoir to the bowl. It’s a pretty straightforward fix with a toilet repair kit available at any hardware store.
Less commonly, toilet runs can also be caused by sediment affecting flushing and filling. If your water bills seem high, check for quiet leaks. Put food coloring in the upper reservoir and see if it gets into the leave-in bowl.
